Editing your route on the map (obsolete)

From waze
Jump to: navigation, search

These instructions are for the older Waze map editing interface and is no longer supported. Please see the Waze Map Editor instructions for the current editing interface instructions.

This information is obsolete and the active links to this page are being reviewed for disconnection or replacement.

The waze live map is user-generated and corrected; any user can edit any of the roads they've wazed (driven with waze running). By doing so, you will receive more points that will gradually give you more editing permissions on all areas of the map. There are some videos with some basic tips for editing in this post on the user blog. It can help pick things up a bit quicker to see a demonstration.

To make any changes on the map, log in (upper right-hand corner of the home page).



Login1.gif
Login2.gif


Finding the roads you've driven

  • Click the Update Map tab
  • From the View panel, choose Archive.

    ViewPanel.gif

    You'll get an overlay layer listing all your journeys, latest first.

    Archive.gif

  • To see the route of a journey, click on its icon. The map for that journey will be displayed
  • The route of your journey may have three colours
    1. Green means that Waze tracked you driving along the road on the map
    2. Yellow means that you weren't exactly positioned on the road according to the map, but close enough. This may be due to GPS inaccuracy, but it may also be because the position of the road is not correct. You may want to consider editing the road geometry
    3. Red means that Waze didn't consider you were driving on a mapped road at all. This may be due to GPS inaccuracy, but it may also be because the position of the road is not correct, or that the road you were driving on is not yet recorded on Waze's map. You may want to consider editing the road geometry or recording a new road

If Waze does not match your driving route to the mapped roads, it may mean you lose your route. You may also miss out on earning points by, for example, driving over unconfirmed roads

Searching for a route section

If you remember which routes you've wazed, you can go to them directly rather than via the archive.

  • After logging in, choose the LiveMap tab: LiveMapTab.gif
  • Enter the name of the street and city – for instance, Van Ness, San Francisco.

    AdressTab.gif

    You'll get a list of all the possible streets.

    PossibleStreets.gif

    Choose the one you want to edit.
  • Alternatively, you can search by zip code and then choose the first result on the list of results. You'll get a street map of the area selected.
  • Click the Update Map to switch to the updating/editing function.

Setting your viewing preferences for updating

The Update Map view shows you a satellite map of the area with the roads superimposed.

  • You can zoom in and out via the zoom bar on the left hand side of the screen or using the scroll button of your mouse
  • You can scroll to new areas using the direction arrows above the zoom bar.
  • To see the road map without the satellite view, select Aerial from the bottom of the Layers panel



LayersPanel.gif

  • The other layer options on that menu are also on-off toggles to display the relevant information; so you can adjust the map to show exactly what you want to see.

How to Edit

To edit a feature on a route you've driven, click the feature to select it, then choose one of the options from the Edit panel in the top right-hand corner of the map.

An intersection

click it to select it; a circle will appear around it:

Intersection.gif

Then choose the relevant selection from the Edit panel:

EditPanel.gif

  • Choose "Turn into a roundabout" if there's a roundabout there and not a simple intersection. (Make sure the intersection is the heart of the roundabout - moving it before creating the roundabout is far easier than afterwards).
    • The map will display the intersection in black, and suggest a size (radius) for the roundabout.
    • The size is taken from GPS points and is usually accurate, so just accept the suggestion.
    • When the roundabout is displayed, check if the size looks right. If not, enter a different value for the size to update the display.
    • When it looks right, choose Save Changes.
  • Choose "Move intersection" if it's displayed on the map in the wrong place. Then drag the circle marking the intersection to its new position and click Save Changes.

A single road segment

click it to select it; it will be marked in color

SingRoadSeg.gif

and the available options will be shown on the Edit Panel:

EditPanel2.gif

  • Choose "Edit road details" to add information about the road. The Edit panel will display the types of information you can add or change, mostly via drop-down menus.

    EditPanel3.gif

    You can change the name of the street by typing it in. When you're done, click Save Changes.
    • If you've marked a road as one-way, when you save the changes it will be marked in one of the two possible directions. If the traffic actually flows in the other direction, you can now choose to switch the direction of flow.
    • To cancel the edit, just choose Cancel, or "Deselect all",

      Deselect.gif

      or click again on the road to deselect it.

The Edit Road Details menu also includes some information you can't change, such as the length of the road, the user who first wazed it, and the last user who updated it. If several wazers have driven the segment, the average speed to drive it will also appear.

  • Edit road geometry – lets you make several changes to a road segment:
    • To remove an existing node (intersection) on a road segment: press 'd' or the Delete key while hovering above it.

      Road1.gif

    • To lengthen the end of a road which is too short on the map, drag the end of it to the right place. (This will only work if the end of the road is not connected to any other segment).
    • To change the exact path of a road segment – for instance, it's shown straight but it should be curved – click on the road and a circle will appear on it. Drag this circle in the relevant direction.
  • Split to two one-way roads: if a single two-way road appears on the map but on the ground there are really two parallel one-way roads, select the road and choose this option. (Please see the Map Editing Best Practices concerning this topic before doing this!)
    • The map will still display one road as before, but with two direction arrows on it, one in each direction: < and >, indicating two one-way roads. Actually what's really in the map at this point is two one-way roads, one displayed on top of the other so you can only see the top one.
    • To display this as two separate roads, drag the one you can see (the top one) slightly up, and save the change. The map will be redrawn with one road slightly above the other, and one arrow on each.
    • Check that the arrows displayed match the actual direction of traffic on each road. If the arrow directions don't match the real situation (i.e. traffic actually flows along them in the reverse direction to that shown), drag the top road down to place it below the other one. Click "Save changes" to see the effect.
  • Split road at a point: Choose this option to add an intersection not shown on the map and/or when adding a new road not shown on the map, which connects with this one. Then click the road segment at the point where the intersection should be:

    Road2.gif

    And click "Save changes"

Two road segments

Selecting two road segments displays (first one using regular left click, second one using <Ctrl>+left click), in the Edit panel, a list of changes you can make to the relationship between them:

  • A divided highway: sometimes these are marked as two parallel one-way roads by mistake.
    • Select both lanes Road3.gif and choose "Merge to one road" from the Edit panel to mark them as a two-way road instead of two one-way roads.
    • This correction is only possible if the distance between the two roads/lanes is about 30 feet (10 meters) or less, and the roads are the same length.
  • Correcting small inaccuracies:
    • if two road segments are connected but the map shows them as if they're not, select both and choose ""Connect roads by order of selection". The order in which you select the roads is important – the first road selected will be adjusted so that it joins up with the second. Again, this correction is only possible if the distance between them is not more than about 30 feet (10 meters). If you're experiencing issues with connecting roads, this may be due to the direction the road is marked as. If either of the roads are marked as "no entrance", a connection will not be possible. The simplest way to make a connection is to mark both roads as "two way" and then create the connection. Make sure the direction is correct once you're finished with the connection. ie make sure "one way" roads are marked as such.
    • After saving this change, check that the turn permissions between the two roads are accurate and correct them if not, as described below.
  • Adding and correcting turn restrictions:
    • Select two connected roads. Again, the order in which you select the roads is important – turns are always from the first road selected, into the second.

      Road4.gif

    • Choose from the Edit panel:

      EditPanel4.gif

    • Choose "create turn restriction" to indicate that you cannot turn from the first road selected, into the second.
    • Choose "Cancel turn restriction" to remove an indication that currently appears, forbidding turns from the first road selected into the second.
    • In both cases you'll get a request for confirmation – "are you sure?" You can choose "No" to cancel the change or "Yes" to implement it.
    • If you selected the wrong road first, the turn restriction you entered may be wrong. In that case just cancel it, deselect the roads, and select them again in the preferred order.

More than two road segments:

  • Select any number of roads or road segments to edit common information about them.
  • For instance, to change the name of a road, you can select all the relevant segments and then choose Edit Road details and enter the new name.

Suggest a map correction to the Waze community

NOTE: Map update requests can be handled only by an Area Manager assigned to the area you are reporting within. Area Managers do not work for Waze, but are members of the Waze public community of members.

  • Check you're viewing the Live Map; if you're not, click the Live Map tab to move to it.
  • Search for a route or area as described above.
  • Click a point on the map displayed. You'll see a message balloon giving a short description (e.g. street name, one way or two-way) and a link labeled "Found a Mistake?"

    Mistake.gif

  • Click the link to get an overlay layer displaying a fill-in form where you can choose the type of mistake and suggest a correction. Give your name and email (anonymous corrections aren't accepted) and click Submit.

    ReportMistake.gif

    Then close the overlay window.