道路命名

From waze
Jump to: navigation, search

编辑器中的道路分类请查看道路类型

这个页面只覆盖了中国道路名称。其他国家请查看这个页面.

道路命名

注意:我们在位智地图编辑器中修改道路名称。在未来我们也许能够显示道路备用名称,并选择那一个是“常用”名字。公路标识在这部分会被断开,在这个区域标识可能会不显示。

当然如果你不计划改变道路的名字,最好是论坛询问一下或等到上述变化的实施。

新增!由于客户端升级,一些命名规则已经改变了。修改公约将有一个粗体*新*。这些变化已经完成。感谢配合。

一些道路其实有两个共同的名字,但目前我们只能显示一个名字。

对于所有这些问题,我们目前只能请你先忽略离开。我们正在研究一些改进,将自动适当的命名,也允许每条路有多个名称(首要名字被显示,但其他的名称用于搜索)。

共用线路命名

当两个或更多的高速公路(或国道)同时共用一段线路(一段路由多个编号公路名称),这段路按照最“重要”那条道路命名。

重要街道通常会有下列一个或多个特点:

  • 共用线路采用的“里程”
  • 共用线路采用的“出口编号”
  • 共用线路两端,会作为一个出口。

其他路线编号可以作为道路备用名称。

在公路穿过城镇的时候,这些公路的当地名称与编号公路名称同时存在,在这些情况下这条路应该有以下考虑:

  • 如果当地路牌只标注了本地名称, 那本地名称应在位智地图中作为主要名称使用。编号路线标识为这段道路的备用名。
  • 如果当地路牌只标注了道路编号。道路编号将作为首要道路名称,本地名称标识为备用名称。
  • 如果当地路牌在本地名称和道路编号交替显示多次。那就将两者结合起来作为道路名称,例如“东望街/国道102线”

国家高速 China Expwy G15 sign.png China Expwy G1514 sign.png

国家高速的命名包含一下几部分:
G15 沈海高速
G1501 沈阳绕城高速
G4W 广澳高速

规则:命名采用编号+中文简称。编号为数字编号前加字母“G”。国家高速主线(G#、G##),联络线(G##1#),城市环线(G##01),并行路线主线编号后加英文字母“E”、“W”、“S”、“N”标识方向。

省级高速 Guangdong S16.png

S1 迎宾高速
S1 广乐高速
S21 广惠高速
各个省市单独编号,在本省范围内编号不重复。

国道/省道 China G101.png

国道
长名称
102国道 京哈线
短名称
G102
省道
长名称
101省道 沈营线
短名称
S101
共用道路请参考,共用线路命名

县道

县道
长名称
101县道 沈李线
短名称
沈李线
X101

出口匝道入口匝道

China Exit.jpeg
China Exit2.jpeg

高速公路出口入口的道路类型必须设置为匝道道式(Ramp)。匝道的尽可能地用出口或入口作为道路名称。语音导航与公路路牌的完美同步是努力的目标。如果做的足够好司机就不用纠结位智软件屏幕显示的地图,或是其他向导的指挥了

  • 如果出口标志显示一个数以及公路(城市)的名字,出口匝道应命名为“出口120: 独山大道”。有收费站的名字更佳,出口匝道应命名为“出口120翟庄站: 独山大道”。
    • 加入一个冒号因为它增加了一个停顿,使文本到语音的容易理解。
  • 如果出口没有编号, “出口 东望街”、“出口 翟庄站”。
  • 如果一个出口是多的道路(城市),用斜线分割:“出口6A: 铜陵/安庆”。
  • 如果出口标识显示一个或多个字母:“出口33B: 岐山路”或“出口35C-B-A: 新华路/重工街/五马路”。(多个字母标识出口中国可能没有。)

入口坡道,使用这种格式:“驶入[街道名称]/[城市]方向”例如:

  • “驶入沈海高速/大连方向”

New streets

In some cases, there are brand new roads that do not yet have a name visible to drivers. Or the person who used the pave option did not leave a note for the name of the new road. In these cases, it is OK to leave the name of the road blank by marking "none" for the Address Properties field in the editor, but make sure to choose the proper road type and confirm the other road details to ensure the road appears on the client app.

Incomplete segments or red roads

Incomplete.jpg

Be sure to select country, state, enter the city name or check No City, and enter a street name, or check No Street. Until you do this, your road will not be routable and will not show on the client map. These incomplete segments are colored bright red in WME.

This must be done on all streets created in WME, and on all streets created with the client "Pave" function.

"Paved" streets must also be connected to their adjacent roads, and turn restrictions must be set in order to be routable.

Abbreviations & Acronyms

Only abbreviations that Waze recognizes should be used within the editor. Since Waze uses TTS (Text-to-Speech) prompting, it is important that the correct abbreviations are used to produce the correct speech output.

A basic rule of thumb is, "when in doubt, spell it out".

Refer to the Abbreviations & Acronyms page for a list of suffix abbreviations.

Construction Zones; naming large sections of major roads that are under construction

See the article How to handle road closures before renaming road segments for construction.

As of February 2013, roads can be closed using the Waze application. The following should only be used for long periods (months) of road closures.

Using the naming rules for your major roads, e.g., interstates typically would use "I-10 S", alter the name to show that the segments are part of a construction zone by adding the suffix "CONST ZN". In our example above, "I-10 S" becomes "I-10 S CONST ZN". In these cases with roads that are closed for extended periods it is best to physically disconnect the closed roads (segments) from the road network during the construction. If you only set the turn restrictions to red, there are conditions when the routing server may still find that route as better than some other route even when it is set to restricted (red).

When temporarily re-setting road geometry, closely monitor recent GPS points as the aerial maps will likely display an out-dated view. The GPS points layer may not be up to date either so it's best to have local knowledge of the construction before editing the map. Also, be sure to closely monitor these sections of roadway and remove the CONST ZN suffix whenever the construction is done.

Official Sources of Mapping information

Being in the Waze community of editors means sharing information you discover and learning from the discoveries of others! You can see some of the (old) official sources of mapping information (US only) provided in the forum or check out the (new) mapping resources wiki page (preferred).

Feel free to add new ones.

Back to Map Editing