Difference between revisions of "Road names/Australia"

From waze
Jump to: navigation, search
(Abbreviations & Acronyms)
(Road types)
Line 117: Line 117:
 
Unfortunately this has not been observed in the past, so we have to do a lot of fixing.
 
Unfortunately this has not been observed in the past, so we have to do a lot of fixing.
  
==Road types==
+
==Road types and Lock levels==
The following convention is the recommended way to label road types in Australia.
+
The following convention is the recommended way to label road types in Australia. If it is too difficult or complicated to determine the road type, it is best to label the road type in a way that would be helpful to the driver on that road. More information can be found [[Road Type| Here.]]
 
+
The Australian route numbering system contains a mix of old shielded routes and newer alphanumeric routes, with some overlap. Judgement and discretion may be necessary sometimes, especially as some states have been slow in implementing the new national alphanumberic system. Some road types in Australia officially use a newer official designated type or name, but may use the road sign from a previous or discontinued classification. If it is too difficult or complicated to determine the road type, it is best to label the road type in a way that would be helpful to the driver on that road.
+
 
+
More information can be found [[Road Type| Here.]]
+
 
+
  
 +
To protect the high ranking roadgrid from accidental damage especially from unexperiened editors the segments have to be locked at a certain level which you find for each roadtype in the respective section.
  
 
{| class="wikitable unsortable" style="background:#FFFCB0; font-size:80%; margin: 1em auto 1em auto" border="1"
 
{| class="wikitable unsortable" style="background:#FFFCB0; font-size:80%; margin: 1em auto 1em auto" border="1"
Line 130: Line 126:
 
! Special Note
 
! Special Note
 
|-
 
|-
| Unfortunately there is no nation-wide consistent system. So if the need arises, you'll have to encode the proper shield according to the examples provided below, even if it is stated here as a different roadtype (i.e. NR8 is according to official WA governmental documents a freeway, even if its shield would be a Minor Hwy according to QLD or VIC standards). As stated above: use judgement and discration in combining the shields with the proper roadtype.
+
| Unfortunately there is no nation-wide consistent system (i.e. NR8 is according to official WA governmental documents a freeway, even if it would be a Minor Hwy by its shield according to QLD or VIC standards). So use judgement and discration in combining the shields with the proper roadtype.
 
|-
 
|-
 
|}
 
|}
 
 
 
  
  
Line 143: Line 136:
 
! Waze Road Type
 
! Waze Road Type
 
! Description
 
! Description
! Road Shield Examples
+
 
 
|-
 
|-
 
| [http://en.wikipedia.org/wiki/Freeways_in_Australia Freeway]
 
| [http://en.wikipedia.org/wiki/Freeways_in_Australia Freeway]
 
| Freeway, motorway, expressway and tollway. There must be no intersections and there must be no access or exits except from ramps. Usually designated by a gold-on-green alphanumeric road number designation that begins with the letter "M".In the case of tollways the sign is presented in a gold-on-blue style, but for toll roads are handled in another way we don't cover it with the road shields.
 
| Freeway, motorway, expressway and tollway. There must be no intersections and there must be no access or exits except from ramps. Usually designated by a gold-on-green alphanumeric road number designation that begins with the letter "M".In the case of tollways the sign is presented in a gold-on-blue style, but for toll roads are handled in another way we don't cover it with the road shields.
| [[Image:Australian Alphanumeric State Route M3.PNG|50px]]
+
 
 
|}
 
|}
 
* Road Type: Freeway  
 
* Road Type: Freeway  
 
* City: activate No-City checkbox
 
* City: activate No-City checkbox
* Name: <Mx>" - "<Name> i.e. „M3 - Eastern Fwy“ will be displayed as<br>[[Image:Australian Alphanumeric State Route M3.PNG|50px]] Eastern Fwy
+
* Name: <Mx>" - "<Name> i.e. „M3 - Eastern Fwy“  
 
* Lock: lv5
 
* Lock: lv5
  
Line 160: Line 153:
 
! Waze Road Type
 
! Waze Road Type
 
! Description
 
! Description
! Road Shield Examples
 
 
|-
 
|-
 
| [http://en.wikipedia.org/wiki/National_Highway_(Australia) Major Highway]
 
| [http://en.wikipedia.org/wiki/National_Highway_(Australia) Major Highway]
 
| National highways. Usually designated by gold-on-green shields with the word "National" written at the top. May contain alphanumeric numbering with the letter "A" at the start of the number, or may just use a number. Also referred to as primary routes.
 
| National highways. Usually designated by gold-on-green shields with the word "National" written at the top. May contain alphanumeric numbering with the letter "A" at the start of the number, or may just use a number. Also referred to as primary routes.
| [[Image:Australian National Route A8.png|50px]][[Image:Nationalhwy.png|50px]]
 
 
|}
 
|}
 
* Road Type: Major
 
* Road Type: Major
 
* City: activate noCity checkbox
 
* City: activate noCity checkbox
* Name: <Axx>" - "<Name> i.e. „A8 - Barton Hwy“ will be displayed as<br>[[Image:Australian National Route A8.png|50px]] Barton Hwy  or<br><NHxx>" - "<Name> i.e. "NH1 - Stuart Hwy" will be displayed as<br>[[Image:Nationalhwy.png|50px]] Stuart Hwy
+
* Name: <Axx>" - "<Name> i.e. „A8 - Barton Hwy“ or<br><NHxx>" - "<Name> i.e. "NH1 - Stuart Hwy"  
 
* Lock: lv3
 
* Lock: lv3
 +
  
 
===Minor Highway===
 
===Minor Highway===
Line 176: Line 168:
 
! Waze Road Type
 
! Waze Road Type
 
! Description
 
! Description
! Road Shield Examples
 
 
|-
 
|-
 
| [[State Highways in Australia |Minor Highway]]
 
| [[State Highways in Australia |Minor Highway]]
 
| State highways or State Roads. Usually designated by a numbered white-on-blue bullet sign, or by a gold-on-green alphanumeric designation starting with the letter  "B" or "C". Also referred to as secondary and tertiary routes.
 
| State highways or State Roads. Usually designated by a numbered white-on-blue bullet sign, or by a gold-on-green alphanumeric designation starting with the letter  "B" or "C". Also referred to as secondary and tertiary routes.
| [[Image:Australian_State_Route_8-1.png|50px]][[Image:Australian_Alphanumeric_State_Route_B12.png|50px]][[Image:Australian_Alphanumeric_State_Route_C234.PNG|50px]]
 
 
|}
 
|}
 
* Road Type: Minor
 
* Road Type: Minor
 
* City: City Name, see [[Australian_City_Names| Australian City Naming]]
 
* City: City Name, see [[Australian_City_Names| Australian City Naming]]
* Name: <SRxx>" - "<Name> i.e. „SR8 - Graham Farmer Hwy“ will be displayed as<br>[[Image:Australian_State_Route_8-1.png|50px|50px]] Graham Farmer Hwy  or<br><Bxx>" - "<Name> i.e. "B12 - Mallee Hwy" will be displayed as<br>[[Image:Australian_Alphanumeric_State_Route_B12.png|50px]] Mallee Hwy  or<br><Cxxx>" - "<Name> i.e. "C234 - Borung Hwy" will be displayed as<br>[[Image:Australian_Alphanumeric_State_Route_C234.PNG|50px]] Borung Hwy
+
* Name: <SRxx>" - "<Name> i.e. „SR8 - Graham Farmer Hwy“ or<br><Bxx>" - "<Name> i.e. "B12 - Mallee Hwy" or<br><Cxxx>" - "<Name> i.e. "C234 - Borung Hwy"
 
* Lock: lv3
 
* Lock: lv3
  
Line 198: Line 188:
 
allow a lower level editor to connect the surrounding streets later without beeing  
 
allow a lower level editor to connect the surrounding streets later without beeing  
 
blocked by the locked highway.</span></blockquote>
 
blocked by the locked highway.</span></blockquote>
 +
  
 
===Primary Street===
 
===Primary Street===
Line 204: Line 195:
 
! Waze Road Type
 
! Waze Road Type
 
! Description
 
! Description
! Road Shield Examples
 
 
|-
 
|-
 
| Primary Street
 
| Primary Street
 
| Main Roads, Regional Roads, Tourist Drives, Scenic Drives, etc that are not classified as highways. They connect suburbs and towns. May also include roads designated as"D" roads in some states. Also referred to as tertiary routes.
 
| Main Roads, Regional Roads, Tourist Drives, Scenic Drives, etc that are not classified as highways. They connect suburbs and towns. May also include roads designated as"D" roads in some states. Also referred to as tertiary routes.
| [[Image:touristdrive.png|50px]]
 
 
|}
 
|}
 
* Road Type: Primary
 
* Road Type: Primary
 
* City: City Name, see [[Australian_City_Names| Australian City Naming]]
 
* City: City Name, see [[Australian_City_Names| Australian City Naming]]
* Name: <TRxxx>" - "<Name> i.e. „TR10 - Princes Hwy“ will be displayed as<br>[[Image:touristdrive.png|50px]] Princes Hwy
+
* Name: <TRxxx>" - "<Name> i.e. „TR10 - Princes Hwy“
 
* Lock: lv1
 
* Lock: lv1
 +
  
 
===Street===
 
===Street===
Line 220: Line 210:
 
! Waze Road Type
 
! Waze Road Type
 
! Description
 
! Description
! Road Shield Examples
 
 
|-
 
|-
 
| Street
 
| Street
 
| Urban streets and rural roads not identified above. Use also when in doubt of proper street type.
 
| Urban streets and rural roads not identified above. Use also when in doubt of proper street type.
|
 
 
|-
 
|-
 
|}
 
|}
Line 231: Line 219:
 
* Name: Streetname according to postal adress  
 
* Name: Streetname according to postal adress  
 
* Lock: lv1
 
* Lock: lv1
 
 
{| class="wikitable unsortable" style="background:white; font-size:80%; margin: 1em auto 1em auto" border="1"
 
|-
 
! Metroroads
 
! Description
 
|-
 
| [[Image:MotorwayShield.png|50px]]
 
| Metroroads are not a street type but a route, following various roadtypes. Currently subject to change into the above mentioned system - therefore we decided against implementing them into the Client. This entry is just for information purposes and to cover any questions arising
 
|-
 
|}
 
  
 
==Dual Carriageways==
 
==Dual Carriageways==

Revision as of 00:56, 24 November 2013

This page covers road names for the country listed in the page title. For other countries see this page.

Waze Australia Logo.png

Introduction

This forms part of Australian Editing Best Practice. Editors are encouraged to follow these guidelines.

Road Name & Number

As first country in Waze Australia has a complete set of road shields, which are generated by the system automatically, if a certain pattern in applying the Road Name & Number is observed.

Rsau.jpg

To get a road shield displayed in the client the form of the shield and the number (numeric or alphanumeric) that it should field have to be coded in the street name in a predefined pattern. Please use the patterns exactly as stated there, otherwise the display in the client will not work properly.


Traditional route numbering
Road Shield Example
(Client Screenshot)
Pattern Example streetname in WME
National Highway
Shield NH.jpg
NHx - Name

NHxx - Name

NH1 - Stuart Hwy
National Route
Shield NR.jpg
NRx - Name

NRxx - Name

NR1 - Pacific Hwy
Alternate National Route
Shield ALTNR.jpg
ALTNRx - Name

ALTNRxx - Name

ALTNR1 - Dandenong Rd
State Route
Shield SR.jpg
SRx - Name
SRxx - Name
SRxxx - Name
SR8 - Anything Hwy
Metro Road
Shield MR.jpg
MRx - Name

MRxx - Name

MR5 - Centenary Hwy
Rural Road/Route
Shield RR.jpg
RRx - Name

RRxx - Name

RR99 – Dontknowit Rd
Tourist Road/Route
Shield TR.jpg
TRx - Name

TRxx - Name

TR7 – NoIdea Rte
Alphanumerical route numbering
Road Shield Example
(Client Screenshot)
Pattern Example streetname in WME
National M
Shield NM.jpg
NMx - Name

NMxx - Name

NM39 - Goulburn Valley Fwy
Shield M.jpg
Mx - Name

Mxx - Name
Mxxx - Name

M3 - Eastern Fwy
National A
Shield NA.jpg
NAx - Name

NAxx - Name

NA8 - Barton Hwy
Shield A.jpg
SRx - Name
SRxx - Name
SRxxx - Name
SR8 - Anything Hwy
Alternate A
Shield ALTA.jpg
ALTAx - Name

ALTAxx - Name

ALTA2 - Warrego
Shield B.jpg
Bx - Name

Bxx - Name
Bxxx - Name

B12 - Road Name
Shield C.jpg
Cx - Name

Cxx - Name
Cxxx - Name

C234 - Example Rd

Abbreviations & Acronyms

We decided long ago to use abbreviations (Rd instead of Road) and made an extra page for it, because all abbreviations have to be introduced to TTS for proper pronounciation. For place, feature, roadway & traverseable path naming, please see:

Abbreviations & Acronyms (Australia)

Unfortunately this has not been observed in the past, so we have to do a lot of fixing.

Road types and Lock levels

The following convention is the recommended way to label road types in Australia. If it is too difficult or complicated to determine the road type, it is best to label the road type in a way that would be helpful to the driver on that road. More information can be found Here.

To protect the high ranking roadgrid from accidental damage especially from unexperiened editors the segments have to be locked at a certain level which you find for each roadtype in the respective section.

Special Note
Unfortunately there is no nation-wide consistent system (i.e. NR8 is according to official WA governmental documents a freeway, even if it would be a Minor Hwy by its shield according to QLD or VIC standards). So use judgement and discration in combining the shields with the proper roadtype.


Freeway

Waze Road Type Description
Freeway Freeway, motorway, expressway and tollway. There must be no intersections and there must be no access or exits except from ramps. Usually designated by a gold-on-green alphanumeric road number designation that begins with the letter "M".In the case of tollways the sign is presented in a gold-on-blue style, but for toll roads are handled in another way we don't cover it with the road shields.
  • Road Type: Freeway
  • City: activate No-City checkbox
  • Name: <Mx>" - "<Name> i.e. „M3 - Eastern Fwy“
  • Lock: lv5


Major Highway

Waze Road Type Description
Major Highway National highways. Usually designated by gold-on-green shields with the word "National" written at the top. May contain alphanumeric numbering with the letter "A" at the start of the number, or may just use a number. Also referred to as primary routes.
  • Road Type: Major
  • City: activate noCity checkbox
  • Name: <Axx>" - "<Name> i.e. „A8 - Barton Hwy“ or
    <NHxx>" - "<Name> i.e. "NH1 - Stuart Hwy"
  • Lock: lv3


Minor Highway

Waze Road Type Description
Minor Highway State highways or State Roads. Usually designated by a numbered white-on-blue bullet sign, or by a gold-on-green alphanumeric designation starting with the letter "B" or "C". Also referred to as secondary and tertiary routes.
  • Road Type: Minor
  • City: City Name, see Australian City Naming
  • Name: <SRxx>" - "<Name> i.e. „SR8 - Graham Farmer Hwy“ or
    <Bxx>" - "<Name> i.e. "B12 - Mallee Hwy" or
    <Cxxx>" - "<Name> i.e. "C234 - Borung Hwy"
  • Lock: lv3


A special note on locking:

The above mentioned roadtypes are vital for routing calculation in Waze, therefore they need to be locked to prevent especially new editors from unintentionally damaging these traffic arteries. But keep in mind that a lock also blocks lower level editors from adding streets. So only apply a lock on a segment, if all roads are

adjected.
Handle.png

If creating a new road in a not yet mapped area, you also may choose to add just one short segment of an adjecting road (a handle) to create the junction and allow a lower level editor to connect the surrounding streets later without beeing

blocked by the locked highway.


Primary Street

Waze Road Type Description
Primary Street Main Roads, Regional Roads, Tourist Drives, Scenic Drives, etc that are not classified as highways. They connect suburbs and towns. May also include roads designated as"D" roads in some states. Also referred to as tertiary routes.
  • Road Type: Primary
  • City: City Name, see Australian City Naming
  • Name: <TRxxx>" - "<Name> i.e. „TR10 - Princes Hwy“
  • Lock: lv1


Street

Waze Road Type Description
Street Urban streets and rural roads not identified above. Use also when in doubt of proper street type.
  • Road Type: Street
  • City: City Name, see Australian City Naming
  • Name: Streetname according to postal adress
  • Lock: lv1

Dual Carriageways

The following convention should be followed where possible, although it is acknowledged that you may need to deviate from it in some circumstances.

A road can be split into be 2 one-way roads if all of the following conditions are met:

  1. The central reservation is > 15m
  2. There's a visible gap between the GPS traces
  3. It is split by physical barrier (Concrete, Armco, pedestrian barrier etc)

Pedestrian refuges and painted road separation (cross hatching that can be driven over) should not normally be split.

Special Note
You have to keep in mind, that Waze actually is not supporting split roads - i.e. all reports to the opposing lane of a split road are in vain, because for the client this are two seperate one-way-streets, it doesn't know any opposing directions. Road splitting has been done way to often in the past, so we "increased" the conditions to be met before splitting a road. But if you have a perfectly working splitted road that does not meet the above stated conditions don't unsplit it. It's a lot of work with the risk of loosing valuable traffic data and house numbers (if done wrong).

Motorway Carriageway Naming Convention

Whenever possible, on split roads, name carriageways with the direction of travel. Insert the direction of travel at the end of the road name:

Examples:
1. M3 - Eastern Fwy (Inbound)
2. A4 - (W)
3. M25 - (ACW)

This makes traffic and incident reports much more useful and helps with navigation.

Exit and Entrance ramps (on/off ramps)

Exit Signage along M1 - West Gate Fwy (E)
Exit signage along M1 - Monash Fwy (SE)

For the best balance between information and screen real estate, the following conventions are used. All ramps will be set as the 'ramp' type in the Waze Map Editor and be locked at the same level as the freeway which joins to them. The name of the road, route number (if applicable) and compass direction (for entrance ramps) should all be added for clear guidance to be given when using the Waze app.

Exit ramps:

  • If the exit sign shows a number as well as a street or highway name, the exit ramp should be named "Exit 15: SR16 - Police Rd".
    • A colon has been added because it adds a pause, which makes the Text-to-Speech directions easier to understand.
  • If the exit is not numbered, "Exit to: C722 - Donnybrook Rd" will do.
  • If a single exit serves multiple roads, use a slash with leading and trailing spaces: "Exit 32: Terminator Blvd / Total Recall Rd".
  • If an exit number contains one or more letters, include it exactly as displayed on the sign: "Exit W2: NRALT1 - Kings Way".
  • Include everything that is present on the last sign prior to the exit. Do not combine all possible pre-ramp signage into the single ramp segment name.
  • If the exit off the main interstate or highway serves multiple exits further down the road, it may be advisable not to name the first exit ramp, to name only the ramps which are the first one to a distinct destination. The Waze client will give all the proper exit and keep left or right instructions to guide the driver to the correct exit, even if the first one is not named. That said, this should only be done if the signage for the first ramp is the same as that on the subsequent, named ramp.

Entrance ramps:

For entrance ramps, use this format. For example:

  • "Entry to: M1 - Monash Fwy (NW)"
  • "Entry to: M39 - Goulburn Valley Fwy (N)"

Roundabouts

To aid navigation instructions, roundabouts should typically remain without a street name

  • City: enter either suburb/city
  • Street: Tick "None"

- where the client comes across a segment with no name it will use the next named segment as the next named instruction whilst retaining any turn signals.

If the roundabout does have a proper, signposted name, then this can be labelled using a 'Junction/Intersection' type landmark that fills the centre of the roundabout.

Freeway Service Centres

Freeway Service Centres should be mapped according to the following convention:

  • Use "Parking Lot Road" for all roads inside the Freeway Service Centres.
    This is necessary to avoid the creation of traffic reports.
  • You may use "Private Road" for limited access roads (with no public right of way). Ensure that they are set to unknown connectivity, turn restrictions are set so that no-one can turn into the road and the segment(s) and connecting segments are locked to enforce the turn restrictions.
  • Do not add a City or Street name to any road with the exception of the ramps.
  • Set landmarks for the major buildings on site (i.e. Services Building, Fuel and Hotels etc).